Pipings
The galvanized steel reinforced pipings of the ZGS range have been designed to match perfectly the fluid mechanics of fume and dust extraction.
The reduced load loss and the extremely easy installation complete the WORKY product range perfectly.
The diameters and bends are proportioned to minimize noise and turbulence. The seals of all the joining and connecting components ensure a system that does not leak or suffer external infiltration.
Catalogue pipings
![ZGS AP](https://www.worky-italy.com/us/computedimage/zgs-ap.i765-kSu4uP-w720-h580-l6-c0-r1.jpg)
ZGS AP
Crossing of part for galvanized hose
![ZGS DA](https://www.worky-italy.com/us/computedimage/zgs-da.i768-kP21zQ3-w720-h580-l6-c0-r1.jpg)
ZGS DA
Asymmetric piece for galvanized hose with 45° branch and sealing washers
![ZGS DS](https://www.worky-italy.com/us/computedimage/zgs-ds.i766-kuE6UHD-w720-h580-l6-c0-r1.jpg)
ZGS DS
Symmetric piece for galvanized hose with 45° branches and sealing washers
![ZGS RID](https://www.worky-italy.com/us/computedimage/zgs-rid.i774-kbFWd8Y-w720-h580-l6-c0-r1.jpg)
ZGS RID
Concentric reduction for galvanized hose with sealing washers
![ZGS SIL](https://www.worky-italy.com/us/computedimage/zgs-sil.i767-kfinsze-w720-h580-l6-c0-r1.jpg)
ZGS SIL
Silencer for galvanized hose with sealing washers
![ZGS TE](https://www.worky-italy.com/us/computedimage/zgs-te.i770-kfagxjb-w720-h580-l6-c0-r1.jpg)
ZGS TE
T piece with sealing washers
![ZGS TU](https://www.worky-italy.com/us/computedimage/zgs-tu.i771-kshoK9B-w720-h580-l6-c0-r1.jpg)
ZGS TU
Galvanized steel-wire reinforced hose in 10 ft rods
![ZGS TUASL](https://www.worky-italy.com/us/computedimage/zgs-tuasl.i772-khUCW2B-w720-h580-l6-c0-r1.jpg)
ZGS TUASL
Galvanized steel-wire reinforced hose in 10 ft rods and opening for periodic inspection
![ZGS VT](https://www.worky-italy.com/us/computedimage/zgs-vt.i773-kqF6R0f-w720-h580-l6-c0-r1.jpg)
ZGS VT
Hermetically closed closing shutter valve for galvanized hose
![ZGS SRG](https://www.worky-italy.com/us/computedimage/zgs-srg.i769-kLv1QBj-w720-h580-l6-c0-r1.jpg)
ZGS SRG
Guillotine valve for galvanized hose
![ZGSCAP](https://www.worky-italy.com/us/computedimage/zgscap.i775-kiQNau-w720-h580-l6-c0-r1.jpg)
ZGS CAP
Vertical open expulsion end with sealing washer
![ZGSCR30](https://www.worky-italy.com/us/computedimage/zgscr30.i777-khsHgD-w720-h580-l6-c0-r1.jpg)
ZGS CR30
30° bend for galvanized hose with sealing washers
![ZGSCR45](https://www.worky-italy.com/us/computedimage/zgscr45.i782-klXhL2H-w720-h580-l6-c0-r1.jpg)
ZGS CR45
45° bend for galvanized hose with sealing washers
![ZGSCR90](https://www.worky-italy.com/us/computedimage/zgscr90.i779-k44yPD-w720-h580-l6-c0-r1.jpg)
ZGS CR90
90° bend for galvanized hose with sealing washers
![ZGSNIP](https://www.worky-italy.com/us/computedimage/zgsnip.i784-kWImmDS-w720-h580-l6-c0-r1.jpg)
ZGS NIP
Joint cowling for steel wire reinforced hoses with seal washers
![ZGSTER](https://www.worky-italy.com/us/computedimage/zgster.i785-kZKN3F8-w720-h580-l6-c0-r1.jpg)
ZGS TER