WORKY dust extraction control units and panels are multifunction components of the dust extraction systems. In addition to extracting the dust generated by sanding, for a healthier workstation, they also provide electrical outlets and compressed air connectors, for faster and more efficient work activities.
WORKY sanding dust extraction systems
Sanding dust extraction and filtration
Thanks to their connection to the DT series extraction units, the WORKY control units or panels carry out the sanding dust extraction function, typical of dust extraction systems, perfectly. Extraction takes place via flexible hoses connected to the orbital sanders, which allow the dust generated to be extracted directly at the source, as the surfaces are being sanded. This allows the operators’ health to be protected, while preventing dust from accumulating on the ground and on vehicles at the same time.
Multifunction control units and panels
The dust extraction systems can be equipped with control units equipped with electrical outlets, and compressed air connectors.
In addition to extracting sanding dust, WORKY’s DTE multifunction control units are also designed to provide work areas with compressed air and electricity.
They are available in various configurations (for connection to an articulated arm or directly to the wall, or for suspension from the ceiling) and in various versions, with or without the possibility of remotely activating the turbine, and with or without an extraction cut-off system.
The dust extraction systems can be equipped with panels.
WORKY’s DTD1 and DTD2 panels are equipped with electrical outlets and compressed air connectors.
They are designed to be mounted flush with the panels in the preparation areas and, in addition to the extraction of the sanding dust, they also provide compressed air and electricity. The possibility of recessed installation of the panel allows the preparation area to be kept entirely clear and free of clutter.
They are available in various configurations with or without the possibility of remotely activating the turbine, and with or without an extraction cut-off system.
WORKY’s DCC2 and DCL2 multifunction panels are designed to be wall mounted, and, in addition to extracting sanding dust, they also provide the work areas with compressed air and electricity.
They are available in various configurations, with remote turbine activation, and with or without an extraction cut-off system.
Choose effective and highly versatile dust extraction systems. Contact our sales department for more information and offers that will meet your needs.
Work with us! Place your trust in people who are capable of creating an entirely new world all around you.